General Engineering Nut – M10 × 1.5
Product: Hexagonal Nuts
Standard: DIN934 property class 12
Raw material: made from quenched and tempered 35CrMoA alloy steel.
Surface: hot-dip galvanized to an average 55 µm coating thickness.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
DIN 934 / ISO 4032 coarse hex nut, class 12, 35CrMoA, hot-dip galvanized 55 µm. Across flats 16 mm, height 8 mm. Proof load stress 1200 MPa; thread tolerance after coating 6AZ/6AX. M10 is the most widely used fastener diameter in general machinery, and in class 12 with HDG coating it tackles outdoor medium-duty joints that demand both strength and corrosion resistance.
Functions and Purposes
The 1.5 mm pitch speeds assembly with cordless impact drivers, while the thread's robustness allows the use of spring washers or flat washers without embedding into the nut face. Common applications include guardrail splices on highways, bearing pedestals of small conveyors, and agricultural implement linkages. In vehicle bodybuilding, M10 secures sub-frame brackets and tow-bar mountings where under-chassis water spray and de-icing chemicals accelerate rust. The galvanized nut matches galvanized bolts to create a uniform corrosion cell, preventing the selective attack that occurs when dissimilar coatings are paired. Serviceability is a key consideration: the coarse thread stays free-moving even after years of mud and grit accumulation, enabling field adjustments with basic tools.
Core Hardness Parameters
Classified by property class as follows：
Main Sales Markets of the Product:Europe, the Middle East and Southeast Asia
Certification and Warranty
We are certified by ISO9001:2015, IATF16949:2016, and other international quality standard certifications.
Long-term quality warranty and comprehensive after-sales service are provided.
Established in 2005, our company has evolved over two decades of continuous development into a leading regional enterprise in the fastener industry with fully automated end-to-end production. With an annual output value exceeding RMB 130 million, our product range covers diverse market segments from mid-range to high-end and is distributed worldwide
Our factory & quipment
Lorem ipsum dolor sit, amet consectetur adipisicing elit.
Hot Tags: general engineering nut – m10 × 1.5, China general engineering nut – m10 × 1.5 manufacturers, suppliers, factory, carbon nuts, Carbon Steel Hex Nut Zinc Plated, Class 8 Hex Nut, class 8 nuts, left hand hex nut, Zinc Plated Nuts
No Information
